Ever needed a low power 120volt AC power source for your car, van or truck? Well this circuit should do the trick for you. It will supply 15 watts of AC power to a device. It should power lamps, shavers, small stereos and small appliances. If you draw to much power the circuit will shut down all by itself. The output of this circuit is a square wave so there may be some noticeable hum on audio units plugged into it. To reduce some of the hum increase the value of the output capacitor which is at .47uf now. That transistor in the circuit are high power PNP transistors. Radio Shack part number 276-2025 are good ones to use or TIP32. The transformer is a 24 volt 2 amp center tapped secondary Radio Shack part number 273-1512 or equivalent.
This site contains a lot of Free E-Books and all information about Electronics Enginering, EBooks, Algorithms, Software Books & Complete Micro Processor Guide
Showing posts with label High Voltage Circiuts. Show all posts
Showing posts with label High Voltage Circiuts. Show all posts
Wednesday, February 13, 2008
12 to 120 Volt Inverter Circuit
Stun Gun Circuit
This stun gun is powered by a 9V battery. The transformer steps up the voltage to about 1800V (but with very low current). A 555 timer IC is used to generate a high-frequency output. A 1 MEG variable resistor can also be used at the output to drop the voltage, but this is optional. If you build this circuit, be careful, as it outputs a high voltage. Touching the output leads will induce a painful shock.
Subscribe to:
Posts (Atom)